Showing 37–48 of 210 results

ASCO™ Series L121 General purpose solenoid valves

As of February 29 2024, the L121 general purpose valves are no longer available for sale, replaced by the ASCO 256 Series.
Relevant documentation is still available below.

ASCO™ Series L182 General purpose solenoid valves

ASCO Series L182 general purpose valves are designed to control water, air, inert gases, steam and non-aggressive fluids. These valves can be used for wide range of industrial applications. These valves are available in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.

ASCO™ Series L182-BIG General purpose solenoid valves

ASCO Series L182-BIG general purpose valves are designed to control water, air, inert gases, steam and non-aggressive fluids. These valves can be used for wide range of industrial applications. These valves are available in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.

AXM-WEB2-D Module

The AXM-WEB2-D dual Ethernet module supports the Acuvim II Series and Acuvim-L Series power meters. Adds robust features with multi-protocol communications such as BACnet, IEC 61850, EtherNet/IP, and DNP. 8 GB internal memory for data logging at 1-second intervals. Configure up to three data loggers. Access real-time metering data remotely with the WEB2 web interface for offsite monitoring and meter management.

Bar graph meter

Panel meters with bar graph reading format, made of 30 segments in red color led.

Accepts process signals 4/20mA, 0/10Vdc, ±20mA, ±10Vdc and potentiometers. Reading from 0 to 100%. Provides +15Vdc excitation voltage to power the sensor The bargraph scaling is configurable using the field correction functions.

CC-423

CURRENT CALIBRATOR
Model : CC-422
* 0 to 24 mA precision current source.
* Range : 0 to 19.99 mA x 0.01 mA. 0 to 24.0 mA x 0.1 mA.

CD 771

  • 3-3/4 digits 4000 count
  • 3-3/4 digits 4000 count
  • Easy to read large LCD with Backlight
  • Large breaking capacity fuse 30kA
  • 1.5V battery check function
  • Thermo plastic elastomer, high resistance  against drop shock
  • Safety cap on current terminal
  • Data hold, Range hold, Relative function
  • Continuity check, Diode test
  • Auto power off function (30min.)
  • Maximum 20A can be measured if the measurement  time is less than 10 seconds. (Take 10 minutes or  longer intervals between measurements)
  • Display : numeral display 4000
  • Sampling rate : 3 times / sec.
  • AC frequency bandwidth : 40〜400Hz (sine wave)

CD 772

  • Double molding with outside made of elastic elastomer material
  • Eye-friendly large-sized display
  • Continuity confirmed by the buzzer and red LED lamp
  • Auto power save: Power save about 30 minutes after no operation
  • Range hold, Data hold, and Relative function â—Large breaking capacity fuse 30kA, Safety cap on current terminal
  • Temperature measurements up to 300 ℃(K type thermocouple temperature sensor

CD 800A

– 3-3 / 4 digits 4000 count
– 0.7% best accuracy
– Capacitance measurement
– Not suitable for measurement of condensers with large leak current.
– Frequency measurement (AC sine wave only)
– Data hold / Range hold
– Relative value
– Auto power off (30min.) (cancelable)
– Low power ohm (input voltage 0.4V) at continuity range
– Solid & protective body cover that can also be used as a tilt stand
– Chip holder behind the body cover
– Display : numeral display 4000
– Sampling rate : 2 times / sec.
– AC frequency bandwidth : 40〜400Hz

CD-4303

CONDUCTIVITY METER
Model : CD-4303
* -P circuit, LCD with display unit.
* Max., Min., Memory recall button.
* 200uS/2mS/20mS, ATC, Cell adj.
* Size : 180 x 72 x 32 mm.

CD-4303HA

CONDUCTIVITY METER
Model : CD-4303HA
* -P circuit, LCD with display unit.
* Max., Min., Memory recall button.
* 200uS/2mS/20mS, ATC, Cell adj.
* Size : 180 x 72 x 32 mm.

CD-770

  • 4000 counts
  • Easy to read large LCD
  • Thermo plastic elstomer, high resistance against drop shock
  • Safety cap on current terminal
  • Auto power off (30min.) (cancelable)

Welcome to ACFET

ACFET is a Leading company in the field of Electromechanical Supplying & Contracting was founded in 2013 , based on more than 25 years’ experience in the Egyptian market due to its founders background. Since its born “ACFET” was a very fast grown company depending in that on providing its customers with the high quality products and services and that reflected with a very good reputation in the market and a very strong relation with the customers.