Low Prices Than Others
More Than 700 Products
24/7 Support Always Be There for You
Best Brands Solutions
Fast Delivery
Energy
Signal
Universal analog input indicator – totalizer
S311A is a new generation LED indicator family with universal analog or temperature sensor input: voltage, current, thermocouples, resistance thermometers (2-, 3- or 4-wire measurement), and potentiometer. Display of instantaneous value and/or integrated value of input and retransmission of integrated value to an isolated digital output of Open Collector type is provided. The integrator value is stored in nonvolatile memory. S311A indicators can have programmable retransmission of measured value on analog output. Temperature measurements can be displayed in degrees Celsius or Fahrenheit. Cold junction compensation is also provided in the case of thermocouple input. Available displays are 4, 6, 8, or 11 (4+7) digits.
Universal converter with 2 galvanically separated analog outputs
Z170REG-1 allows to convert and duplicate an analog signal (mA, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) by 2 indipendents outputs (mA or V). It disposes also of dip switches to set the available input/output ranges. The auxiliary power supply allows also an active or passive connections on the output side. A 4-way galvanic isolation among Power supply // input // output1 // output2 circuits assures the integrity of your datas.
USB-01
USB CABLE
Model : USB-01
* The computer interface cable, one side is the ear phone plug that connect to the meter’s RS232 output, the other side is the USB plug that to connect the computer’s USB terminal.
* Ship along with the driver software.
* Available for all the LUTRON instruments which is built in the RS232 interface, then the meter will have the USB interface.
UT-276A+
Features of UT270+ Series Clamp Earth Ground Testers
Certificates: CE, UKCA
- Auto range
- Data hold
- Data recall
- LCD back light
- Resistance limit alarm
- Low battery indication
- Auto calibration
UT-300C
Temperature range: -18 ~ 400 ° C
Spectral range: +/- 2.0 ° C or +/- 2%
Measurement Repeatability: <+/- 0.5 ° C or +/- 0.5%
Display Resolution: 0.1
Optical Characteristics (D: S): 12: 1
Response Time: 500mS
Set Emissivity 0.10 ~ 1.0
Display Hold
Selection ° C / ° F
Data Hold
Switchable laser for aiming
MIN / MAX temperature display
Sleep mode
Low battery indication
Backlit display
Low alarm
High alarm
UT-501A
UT500 series insulation testers are used to measure the insulation resistance of electrical equipment and household appliances. This is done by measuring the insulation resistance between electrical circuits or between circuits and ground. UT500 series can measure insulation resistance, AC Voltage, low resistance, PI (Polarization Index) and DAR (Dielectric Absorption). These are dieal tools for ensuring transformers, genera-tors, high voltage motors, capacitors, cables, arresters and other electrical equipment that can oprate in a safe and accurate manner.
UT-510 Series
UT510 series testers can measure insulation resistance of large transformers, generators, high-voltage motors and more. UT510 series can also measure PI, DAR and other important specifications. Measured data can then be analyzed through PC software. UT513A can produce test voltage up to 5kV.
UT-521
Earth Resistance Testing:
0 ~ 20 Ohm +/- 2%rdg +/- 1 Ohm
0 ~ 200 Ohm +/- 2%rdg +/- 3dgt
0 ~ 2000 Ohm +/- 2%rdg +/- 3dgt
Earth Voltage Testing:
0 ~ 200Vac (50/60Hz) +/- 1%rdg +/- 4dgt
Data Hold
Backlight display
Data logging: 20
Battery check
Sleep mode – around 10 minutes
Full icon display
Over-range display: display “OL”
Contact badness display: C port or E port don´t contact display “—-Ohm”
Simple 2-wires testing
Precision 3-wires testing
Double insulation protection
UT18D
UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard. These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments. This series should NOT be used with 110V electrical systems.
V / I converter with power for 2 wire transducers
K109S is a device that accepts mA/V signals able to convert it into mA/V standard signals. The device can power also all 2-wire sensors and all parameters are configurable through dip-switches. The power supply connection is available on the terminals or a special connector (K-BUS) allows a distribution of the power supply to the modules via bus connector. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your data.
VB-8201HA
SERIES HA
VIBRATION METER
Model : VB-8201HA
* Professional vibration sensor included.
* Velocity : 200 mm/S.
* Acceleration : 200 m/S2.
* RMS, Peak Hold, Max./Min.
* Size : 185 x 78 x 38 mm
WA-2015
Bench type, RS23/USB, Data recorder
pH/ORP, DO, CD/TDS METER
Model : WA-2015
* Professional bench meter for multi-function: pH/ORP, Conductivity/TDS, Dissolved oxygen.
* pH : 0 to 14.00 pH.
* ORP (mV): 1,999 mV.
* Conductivity: 200 uS/2 mS/20 mS/200 mS.
* TDS: 200/2,000/20,000/200,000 PPM.
* Large LCD with green color backlight.
* ATC (automatic temperature compensation).
* Real time 16,000 no. data logger.
* Data hold, Record (Max., Min.), RS232
* Optional electrode : pH electrode, ORP electrode, CD/TDS probe, Dissolved oxygen probe, pH ATC
　probe.
* DC 1.5V (UM-3, AA) x 8 PCs or DC 9V adapter in.
