Low Prices Than Others
More Than 700 Products
24/7 Support Always Be There for You
Best Brands Solutions
Fast Delivery
Energy
Signal
LX-107HA
LIGHT METER
Model : LX-107HA
* 2,000/20,000/100,000 Lux, Data hold.
* Lux, Ft-candle, max., min., zero, 2 filters.
* Tungsten, Fluorescent, Mercury, Sodium, 4 light type select, microprocessor circuit.
* Size : 185 x 78 x 38 mm.
MG1000
Allows you to measure insulation resistance more safely by avoiding operation mistakes.
• Hot-line state (30V minimum) detection
• Large volt mark with the buzzer sound
• Automatic data hold function
• Bargraph just like analog meter
• Large display with backlight
• Easy to use & tough body
• Display: Numeral display 4000
• Sampling rate:2 times/sec.
• Safety: IEC 61010 CAT.III 600V
MG5000
This instrument is a High voltage Insulation resistance tester for use in measurement of Insulation Resistance of a power line and power equipment within the range of 600V under CAT.IV.
-Test voltage DC5000V/2500V/1000V/500V/250V
-Insulation Resistance up to 1T?
-Short circuit current up to 4mA
-Dielectric Absorption Ratio (DAR) â
—Polarisation Index (PI)
-Auto discharge function
-Data hold(Auto)
-Auto power save: Power save about 10 minutes after the last operation
Micro Ohm Meter 9010A UO
Maximum testing current of 10A
Ranges:
200.0?? / 2000?? 10A
20.00m? / 200.0m? 1A
2.000? / 20.00? 100mA
200.0? 10mA
Maximum resolution of 0.1?? at 10A
Four terminal measurements
4 Lines × 20 Characters LCD
Optical USB to RS-232 data transmission
Well isolated from contact
2 built-in optical LEDs for data transfer
Memory function (200 measurement results)
Auto power off
Low battery indication
Power source: Rechargeable battery DC14.8V 5200mAh 76.96Wh
Safety Standard:
IEC/EN 61010-1 CAT III 300V
EN 61326-1
Micro Ohm Meter MO-2014
4 terminal devices for accurate measurement of very low resistance.
Ideal for measuring the resistance of components precisely.
Ideal for testing protective conductors, lightning conductors and welded points.
Maximum test current is 10A (60000 micro Ohm range only)
Have two working mode, Resistive and Inductive mode, Normal is resistive mode.
Good/Fail set-function for input quality control.
Built-in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.
Especial CALCULATE function to measure cable/wire length.
Wide measuring range, 1 micro ohm – 6 Kilo ohm, 6 ranges.
Large size and back-light LCM display, easy read-out.
LSI circuit provides high accuracy, reliability and durability.
Built-in over input protection.
Durable bench type housing plastic case stand.
MO-5510HA
The polarographic type oxygen probe with an incorpo- rated Temp. sensor, high precision measurement for Dissolved Oxygen(DO), Oxygen in air(O2) & Temp. measurement. * Heavy duty dissolved oxygen probe, probe head can connect with BOD bottle.
* Automatic Temp. compensation from 0 to 50 for sensor probe. ℃
* Build in ” % SALT ” & ” Mountain Height ” compensation adjustment button.
* Microprocessor circuit.
* Records Maximum, Minimum value
MS-7000HA
MOISTURE METER
Model : MS-7000HA
* Range : 9% to 30% moisture content.
* 9 material species groups in memory.
* Max., Min., Data hold, Self-calibration.
* Size : 180 x 72 x 32 mm.
Paperless Recorders
The paper-less recorder is a kind of data logger or data acquisition device to address most industrial recording needs. The new PR series paperless recorders are launched in full product range with outstanding specifications and features. PR series includes a low-cost PR10, a popular PR20 and a high-end PR30. Compared with the first-generation VR series, PR series offers much more, for example recorders in 4.3” & 12.1” displays in addition to 5.6”, 100 msec. sampling rate, external channels, batch, custom display, more strict FDA 21 CFR part 11, handwriting messages, SD slot, 2 USBs, pulse input, field calibration, Web Server, email, 19 languages, IP65, and yet in shorter depth 167mm.
PC-6010
POWER CLAMP METER, high power
Model : PC-6010
* Watt resolution : min. 10 watt.
* Watt(AC,true,20KW/100KW).
* ACA(200A,600A), AC 600V,DC 200V, 2K ohms, diode.
* Size : 230 x 74 x 38 mm.
PC-6011SD
Measurements:
V, A, kW, kVA, kVAR, PF, kWh, kVAh, kVARh, PFH, Power factor, Phase angle, Frequency, Harmonics display, Temperature.
Features:
(UAC: 10 V ~ 600 V; IAC: 5 A ~ 2000 A)
Clamp can accommodate up to 2.2″ (57 mm) diameter
Power quality analyzer for single-phase or balanced three-phasesystem.
Voltage and Current are the True RMS value.
Accessories included:
Instruction manual
8 GB micro SD card
Test Leads
Alligator clips
AC to DC 9V adapter ( linear 110V/220V )
Carrying case
Options:
thermocouple TP-11
USB cable
RS-232 kabel
software SW-U811-WIN
